 |
Accredited Laboratory TL-359 conforming with requirements of ISO/IEC 17025: 2005. |
| WOOD PRODUCTS Construction Materials: Panel Products Plywood Prefabricated Components Timbers Wood Products, General | |
| ANSI/AITC A190.1 | Structural Glued Laminated Timber |
| ASTM D143 | Standard Methods of Testing Small Clear Specimens of Timbers (Excluding Sections 10 and 11) |
| ASTM D198 | Static Tests of Timbers in Structural Sizes (Excluding Section 36) |
| ASTM D1037 | Wood Based Fiber and Particle Panel Materials |
| ASTM D1761 | Standard Test Methods for Mechanical Fasteners in Wood |
| ASTM D2395 | Standard Test Methods for Specific Gravity of Wood & Wood Based Materials |
| ASTM D2559 | Standard Specifications for Adhesives for Structural Laminated Wood Products for Use Under Exterior Exposure Conditions (Excluding Section 15) |
| ASTM D2718 | Standard Methods of Testing Plywood in Rolling Shear |
| ASTM D2719 | Standard Methods of Testing Structural Panels in Shear Through Thickness |
| ASTM D3043 | Standard Methods of Testing Plywood in Flexure |
| ASTM D3044 | Standard Test Method for Shear Modulus of Plywood |
| ASTM D3500 | Standard Methods of Testing Plywood in Tension |
| ASTM D3501 | Standard Methods of Testing Plywood in Compression |
| ASTM D3737 | Standard Method for Establishing Stresses for Structural glued−Laminated timber Manufactuered from Visually graded Lumber |
| ASTM D4442 | Standard Test Methods for Moisture Content of Wood ( Excluding Method C - Distillation) |
| ASTM D4444 | Standard Test Methods for Use and Calibration of HandHeld Moisture Meters |
| ASTM D4761 | Mechanical Properties of Lumber and Wood-Based Structural Material |
| ASTM D5055 | Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists |
| ASTM D5456 | Standard Specification for Evaluation of Structural Composite Lumber Products |
| ASTM E72 | Standard Methods of Conducting Strength Tests of Panels for Building Construction |
| ASTM E196 | Standard Practice for Gravity Load Testing of Floors and Flat Roofs |
| ASTM E455 | Static Load Testing of Framed Floor or Roof Diaphragm Construction for Buildings |
| ASTM E529 | Flexural tests on Beams and Girders for Building Construction |
| ASTM E564 | Standard Method of Static Load Test for Shear Resistance of Framed Walls for Buildings |
| ASTM E661 | Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact loads |
| ASTM E695 | Relative Resistance of Wall, Floor, and Roof Construction and Impact Loads |
| BS 5268 Part2 | Timber and/or Plywood Structures |
| BS 6566 | Plywood |
| CSA O121 | Douglas Fir Plywood |
| CAN/CSA O122 | Structural Glued-Laminated Timber |
| CSA O151 | Canadian Softwood Plywood |
| CSA O153 | Poplar Plywood |
| CSA- O325 | Test Methods for Construction Sheathing |
| CSA- O437 | Test Methods for Waferboard and Strandboard |
| COFI Test Procedures | Bearing Test |
| DIN 52183 | Moisture Content |
| DIN 53255 | Bonding Strength |
| DIN 68705 | Plywood |
| EN 310 | Wood-Based Panels - Determination of modulus of elasticity in bending and bending strength - Determination of characteristic values of mechanical properties and density |
| EN 314 - 1 & 2 | Plywood - Bonding Quality, Part 1: Test methods, Part 2: Requirements |
| EN 322 | Wood−based panels − Determination of moisture content |
| EN 323 | Wood−based panels − Determination of density |
| EN 324 1-2 | Determination of dimensions of boards |
| EN 594 | Timber structures − Test methods − Racking strength and stiffness of structural wall panels |
| EN 596 | Timber structures − timber framed walls − soft body impact test of timber framed walls |
| EN 636-3 | Plywood − Specifications − Part 3: Requirements for plywood for use in exterior conditions |
| EN 13986 | Wood-Based Panels - for use in construction - Characteristics, evaluation of conformity and marking Only for: clauses 5.14 & 5.15 |
| EN 789 | Timber Structures - Test Methods - Determination of Mechanical Properties of Wood-Based Panels |
| FP Innovations-Forintek/Canada Corporation SP-18R | Evaluation Procedures for Synthetic Patching Materials for Repairs to Plywood Panels |
| ISO 3129 | Wood Sampling Methods and General Requirements for Physical and Mechanical Tests |
| ISO 3130 | Wood - Determination of Moisture Content for Physical and Mechanical Tests |
| ISO 3131 | Wood - Determination of Density for Physical and Mechanical Tests |
| ISO 3805 | Plywood - Determination of Density |
| ISO 3806 | Plywood - Determination of Moisture Content |
| ISO 8375 | Solid Timber in Structural Sizes - Determination of Some Physical and Mechanical Properties |
| ISO 9427 | Wood-Based Panels - Determination of Density |
| ISO 16978 | Wood-Based Panels - Determination of Apparent Modulus of Elasticity in Bending and of Bending Strength |
| JAS 1152 | Glue Laminated Timber |
| JAS 233 | Plywood |
| JAS 360 | Structural Panels |
| JAS 701 | Laminated Veneer Lumber |
| Voluntary Product Standard PS1 | Construction and Industrial Plywood. |
| Voluntary Product Standard PS2 | Performance Standard for Wood-Based Structural Use Panels |
| Footnotes: BS: British Standard DIN: Deutsches Institu fuer Normung (German Stds. Institute) ISO: International Organization for Standardization JAS: Japanese Agricultural Standard RILEM: International Union of Testing Research Laboratories for Materials and Structures |
|
AA-694 Scope (ISO 17020)
| Fields Of Inspections |
Type And Range Of Inspections |
Inspection Methods And Procedures |
| Glued built-up wood members | In-plant | CertiWood QSD 08 Certification System Quality Manual; CertiWood QSD 08 – Appendix Z General Inspection Criteria; CertiWood QSD 10 |
| Manufacturing in fields specified above | Qualification and Follow-up In-plant | ICC-ES Acceptance Criteria AC304 |
PCA 107 Scope (ISO Guide 65)
| Fields Of Inspections |
Type And Range Of Inspections |
Inspection Methods And Procedures |
| Glued built-up wood members | In-plant | CertiWood QSD 08 Certification System Quality Manual; CertiWood QSD 08 – Appendix Z General Inspection Criteria; CertiWood QSD 10 |
| Manufacturing in fields specified above | Qualification and Follow-up In-plant | ICC-ES Acceptance Criteria AC304 |
CL-124 Scope (ISO 17025)
| Fields Of Inspections |
Type And Range Of Inspections |
Inspection Methods And Procedures |
| Glued built-up wood members | In-plant | CertiWood QSD 08 Certification System Quality Manual; CertiWood QSD 08 – Appendix Z General Inspection Criteria; CertiWood QSD 10 |
| Manufacturing in fields specified above | Qualification and Follow-up In-plant | ICC-ES Acceptance Criteria AC304 |
